Go to homepage
€0.00*
Valve Exhaust flap control (CB2) made for Audi SQ2 [GA]

Valve Exhaust flap control (CB2) made for Audi SQ2 [GA]

Product number: A-005-039

€425.00*

Prices incl. VAT plus shipping costs to Germany

019287e40bde70979225075244d07145

Control via Drive Select SSA-Memory

Control via Drive Select

SSA-Memory

Plug & Play install

in the footwell

The module is suitable for racing vehicles that are built on a Audi SQ2 [GA]. Not approved for use on public roads according to the German Road Traffic Regulations (StVO). For racing, show purposes, or export only.
Product information "Valve Exhaust flap control (CB2) made for Audi SQ2 [GA]"

With this control unit, you have the option to control your exhaust flaps via the Drive Select and the ESP button.


Functionality and Benefits

Drive Select (Individual: Engine Sound)
Dynamic

The exhaust flaps are permanently open, thus increasing the volume. The result is a sporty sound.

Auto

Flaps open from 3000rpm / 80% throttle (just before kickdown)

Comfort

Flaps open from 4500rpm / 80% throttle (just before kickdown)

Easy Switch
ESC 2x
Double click on the ESC button

With a double click on the ESP button, the flaps can be opened and closed independently of the Drive Select. The automatic opening at 4500rpm is always retained.

Standard Mode
SSA 7sec
Hold the SSA button for 7 seconds

Hold the SSA button for 7 seconds, and the module will be deactivated. Everything behaves as if no module is installed. As feedback for a successful activation or deactivation, the SSA light will automatically switch.

Function Description in Video

Note: Not all functions are available on the SQ2.

The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=oZnlVODGBWw

Additional Features and Benefits

1)
SSA-Memory

Setting of the start-stop automatic is saved and restored after vehicle start

2)
Safe and Permanent Operation

This device is specifically designed for use with electric flap systems

3)
Plug & Play

Installation is done Plug & Play in the footwell behind the A-pillar trim

Can be reverted at any time without leaving any traces

Developed for the racetrack in Germany

Our products are specifically developed for your vehicle to enable more driving pleasure on the racetrack and to comply with track-wide decibel limits.

Installation

The installation is done plug and play in the footwell behind the A-pillar trim (instructions are included in the delivery).

Notes

  • No approval in the StVO (German Road Traffic Regulations)
  • For use in motorsport or for show purposes only
  • The flaps should not be completely closed during full load driving
  • Installation at your own risk
  • No liability is assumed for any damages resulting from disregarding the notes

Electrical devices and batteries must not be disposed of in household waste. Please observe our notes on disposal. "Notes on ElektroG / BattG"

This website uses cookies to ensure the best experience possible. More information...