Control via
Valve Exhaust flap control RX1 for retrofitted exhaust systems with CB1 module
A-001-039
Control via remote control
With our valve control for your compatible retrofitted exhaust system, you have the option to manually switch the exhaust valves. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track!
Compatibility
Regardless of the vehicle, this control is compatible with all retrofitted exhaust systems that have controlled exhaust valves (of the selected type) and were supplied with an ASR CB1 valve control from the manufacturer.
Functionality and Benefits
1)
Control independent of driving profile
You decide on the vehicle sound, not the selected driving profile
2)
Correct stock mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound when starting the vehicle
4)
No intervention in the CAN bus
No risk to other control units
No influence of software updates on the control
5)
Plug & Play to CB1 module
No use of current thieves
Can be reverted at any time without any traces
6)
Remote control
High quality with brushed stainless steel front
High range
€249.00*
Exhaust flap control RX1 for retrofitted exhaust systems with GRAIL CB1 module
A-001-063
Control via remote control
With our valve control for your compatible retrofitted exhaust system, you have the option to manually switch the exhaust valves. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track!
Compatibility
Regardless of the vehicle, this control is compatible with all retrofitted exhaust systems that have controlled exhaust valves (of the selected type) and were supplied with an ASR CB1 valve control from the manufacturer.
Functionality and Benefits
1)
Control independent of driving profile
You decide on the vehicle sound, not the selected driving profile
2)
Correct stock mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound when starting the vehicle
4)
No intervention in the CAN bus
No risk to other control units
No influence of software updates on the control
5)
Plug & Play to CB1 module
No use of current thieves
Can be reverted at any time without any traces
6)
Remote control
High quality with brushed stainless steel front
High range
€249.00*
Valve Exhaust flap control CB2 for retrofitted exhaust systems with CB1 module (Loop in)
A-005-028
Control via vehicle buttons
Intelligent additional functions
With our valve control for your compatible aftermarket exhaust system, you have the
option to manually switch the exhaust valves.
The control is vehicle-specific via the original vehicle buttons. This gives you full control over your vehicle's sound!
The functionality varies depending on the vehicle; you can find this on the corresponding CB2 product page for your compatible vehicle.
Compatibility
Only compatible with existing CB1 in vehicles with factory exhaust valves and compatible software (software number ends with "-C").
Functionality and Benefits
1)
Intelligent additional functions (vehicle-dependent)
including SSA-Memory & transmission S-detection
2)
Correct stock mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide the sound at vehicle start
4)
Plug & Play to CB1 module
No use of power thieves
Can be reverted at any time without any traces
€425.00*
Configurable Valve Exhaust flap control KN1 for retrofitted exhaust systems
A-KN1
Control via remote control
You have retrofitted a flap exhaust system to your vehicle and want to control the flaps freely? Then our flap control KN1 is exactly what you need to gain full control over your vehicle's sound.
Compatibility
After placing your order, we need information about your project so that we can provide you with the appropriate wiring harness.
Advantages
1)
Free control of the exhaust flaps
You decide on the sound of your retrofitted flap exhaust system
2)
Intelligent battery monitoring
Automatic shutdown of the control
3)
Freely programmable start mode
You decide on the sound when starting the vehicle
Functionality
Control of electric or pneumatic exhaust flaps
No matter what type of exhaust flaps you have retrofitted to your vehicle, the control unit KN1 can be switched to the corresponding flap drive at any time via a switch.
Supported are vacuum switching valves from Pierburg, electric actuators from Küster (Audi, VW, Mercedes, etc.) and from SBS (BMW from 2012, Audi and Mercedes from around 2016).
One or two electric actuators can be controlled in parallel, depending on how many exhaust flaps have been retrofitted.
Intelligent battery monitoring
The control unit KN1 can be connected directly to the battery terminals. Thanks to intelligent battery monitoring, the device automatically registers whether the engine is on or off and disconnects all connected consumers when the vehicle is parked. No searching for a suitable ignition signal and no dead battery even after prolonged downtime!
If you want to connect the control unit to the ignition plus of your vehicle, the battery monitoring can also be turned off at any time via a switch on the device.
Control via button or switch
The control unit can also be operated at will using a button or switch. With the press of a button, the flaps can be easily opened or closed.
When using a button or switch with feedback LED, it can be controlled via the control unit:
Flaps open: LED on
Flaps closed: LED off
This way, in addition to the acoustics, you always have a visual way to determine the position of the exhaust flaps. The LED feedback can also be inverted!
Start mode
The start mode describes the behavior of the control after the vehicle starts (The start-stop system of your vehicle is not counted as a vehicle start). The following modes can be set as the start mode, influencing the flap position at vehicle start:
Last state (default): The position of the exhaust flaps is saved when the vehicle is turned off and restored at vehicle start.
Sport mode: Exhaust flaps always open at vehicle start
Comfort mode: Exhaust flaps always closed at vehicle start
The start mode can be changed at will using the remote control.
Inverting the control
With different exhaust flaps (pressureless closed or pressureless open), it may happen that the flap position does not match the selected flap position (button press on the remote control or feedback signal from the LED). If the exhaust flaps close when you wanted to open them, the control signal can be inverted via a switch on the control unit. This way, the position of the exhaust flaps always corresponds to your desired setting.
From
€249.00*
Valve Exhaust flap control RX2 for retrofitted exhaust systems with CB1 module (SSA)
A-029-002
Control via SSA button (optional)
SSA-Memory (optional)
With our valve control for your compatible retrofitted exhaust system, you have the
option to manually switch the exhaust valves.
The control is done via our classic remote control and with the optional extension via the SSA button. This gives you full control over your vehicle's sound on the race track!
Additionally, the module with the optional extension features an SSA memory that restores the start-stop state upon
vehicle start.
Compatibility
The module can ONLY be used if a valve exhaust system with a TÜV-compliant ASR CB1 control has been retrofitted.
Used, among others, for the following vehicles: Golf 7 GTI; Cupra Leon 5F
Functionality and Benefits
Control via Start-Stop Button (only with optional extension)
SSA
5sec
Holding the Start-Stop Button
By holding the SSA button, you can switch between controlling the valves and the
standard start-stop automatic.
SSA
1x
Click on Start-Stop Button
With a click on the SSA button, the valves or the start-stop automatic are controlled.
(depending on the activated mode)
Control via Remote Control
Function Description in Video
The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems.
https://www.youtube.com/watch?v=vb7beGiLq7E
Additional Functions and Benefits
1)
SSA Memory (only with optional extension)
Setting of the start-stop automatic is saved and restored after vehicle start
2)
Control Independent of Driving Profile
You decide on the vehicle sound, not the selected driving profile
3)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
Can be activated via the SSA button
4)
Freely Programmable Start Mode
You decide on the sound at vehicle start
5)
No Intervention in the CAN Bus
No risk to other control units
No influence of software updates on the control
6)
Plug & Play to CB1 Module
No use of current thieves
Can be reverted at any time without any traces
7)
Remote Control
High quality with brushed stainless steel front
High range
€398.00*
Valve Exhaust flap control CB2 for retrofitted exhaust systems with CB1 module (Electrical & Vacuum)
A-005-044
Control via vehicle buttons
Intelligent additional functions
With our valve control for your compatible aftermarket exhaust system, you have the
option to manually switch the exhaust valves.
The control is vehicle-specific via the original vehicle buttons. This gives you full control over your vehicle's sound!
The functionality varies depending on the vehicle; you can find this on the corresponding CB2 product page for your compatible vehicle.
Compatibility
Only compatible with existing CB1 in vehicles with retrofitted exhaust valves and compatible software (software number ends with "-C").
Functionality and Benefits
1)
Intelligent additional functions (vehicle-dependent)
including SSA-Memory & transmission S-detection
2)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound when starting the vehicle
4)
Plug & Play to CB1 module
No use of power thieves
Can be reverted at any time without any traces
€425.00*
Valve Exhaust flap control RX1 for retrofitted exhaust systems with Pierburg v. (U2 + Terminal Adapter)
A-001-067
Control via remote control
With our valve control for your compatible retrofitted exhaust system, you have the option to manually switch the exhaust valves. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track!
Compatibility
Regardless of the vehicle, this control is compatible with retrofitted exhaust systems whose exhaust valves are controlled by a Pierburg switching valve.
Functionality and Benefits
1)
Control independent of driving profile
You decide on the vehicle sound, not the selected driving profile
2)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound at vehicle start
4)
No intervention in the CAN bus
No risk to other control units
No influence from software updates on the control
5)
Plug & Play on existing switching valve
No use of power thieves
Can be reverted at any time without any traces
6)
Remote control
High quality with brushed stainless steel front
High range
€280.00*
Exhaust flap control RX2 for retrofitted exhaust systems with GRAIL CB1 module
A-029-028
Control via SSA button (optional)
SSA-Memory (optional)
With our valve control for your compatible retrofitted exhaust system, you have the
option to manually switch the exhaust valves.
The control is done via our classic remote control and with the optional extension via the SSA button. This gives you full control over your vehicle's sound on the race track!
Additionally, the module with the optional extension features an SSA memory that restores the start-stop state upon
vehicle start.
Compatibility
The module can ONLY be used if a valve exhaust system with a TÜV-compliant ASR CB1 control has been retrofitted.
Used, among others, for the following vehicles: Golf 7 GTI; Cupra Leon 5F
Functionality and Benefits
Control via Start-Stop Button (only with optional extension)
SSA
5sec
Holding the Start-Stop Button
By holding the SSA button, you can switch between controlling the valves and the
standard start-stop automatic.
SSA
1x
Click on Start-Stop Button
With a click on the SSA button, the valves or the start-stop automatic are controlled.
(depending on the activated mode)
Control via Remote Control
Function Description in Video
The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems.
https://www.youtube.com/watch?v=vb7beGiLq7E
Additional Functions and Benefits
1)
SSA Memory (only with optional extension)
Setting of the start-stop automatic is saved and restored after vehicle start
2)
Control Independent of Driving Profile
You decide on the vehicle sound, not the selected driving profile
3)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
Can be activated via the SSA button
4)
Freely Programmable Start Mode
You decide on the sound at vehicle start
5)
No Intervention in the CAN Bus
No risk to other control units
No influence of software updates on the control
6)
Plug & Play to CB1 Module
No use of current thieves
Can be reverted at any time without any traces
7)
Remote Control
High quality with brushed stainless steel front
High range
€398.00*
Valve Exhaust flap control RACE for retrofitted exhaust systems with CB1-R module (Loop in)
A-027-001
Control via vehicle buttons
With our valve control for your compatible aftermarket exhaust system, you have the
option to manually switch the exhaust valves.
The control is vehicle-specific and operates via the original vehicle buttons. This way, you have full control over your vehicle's sound on the race track!
Compatibility
Regardless of the vehicle, this control is compatible with all CB1 controls that have a software suffix "-R" and already have valves installed in the series. (You can find the software number on the top side of the CB1 module "S-xxxxx-xxx-xx-R")
Advantages
1)
Control independent of driving profile
You decide the vehicle sound, not the selected driving profile
2)
No intervention in the CAN bus
No risk to other control units
No influence of software updates on the control
3)
Plug & Play on CB1 module
No use of current thieves
Can be reverted at any time without any traces
€299.00*
Valve Exhaust flap control RACE for retrofitted exhaust systems with CB1-R module (Electrical & Vacuum)
A-027-002
Control via vehicle buttons
With our valve control for your compatible retrofitted exhaust system, you have the
option to manually switch the exhaust valves.
The control is vehicle-specific via the original vehicle buttons. This gives you full control over your vehicle's sound on the race track!
Compatibility
Regardless of the vehicle, this control is compatible with all CB1 controls that have a software suffix "-R" and do not have valves installed from the factory. (You can find the software number on the top side of the CB1 module "S-xxxxx-xxx-xx-R")
Advantages
1)
Control independent of driving profile
You decide the vehicle sound, not the selected driving profile
2)
No intervention in the CAN bus
No risk to other control units
No influence of software updates on the control
3)
Plug & Play on CB1 module
No use of current thieves
Can be reverted at any time without any traces
€299.00*
Valve Exhaust flap control RX1 for retrofitted exhaust systems with CB1.2 module
A-001-065
Control via remote control
With our valve control for your compatible retrofitted exhaust system, you have the option to manually switch the exhaust valves. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track!
Compatibility
Regardless of the vehicle, this control is compatible with all retrofitted exhaust systems that have electrically controlled exhaust valves and are supplied with an ASR CB1.2 (NOT CB1) valve control from the manufacturer.
Functionality and Benefits
1)
Control independent of driving profile
You decide on the vehicle sound, not the selected driving profile
2)
Correct stock mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound at vehicle start
4)
No intervention in the CAN bus
No risk to other control units
No influence from software updates on the control
5)
Plug & Play on CB1.2 module
No use of power thieves
Can be reverted at any time without any traces
6)
Remote control
High quality with brushed stainless steel front
High range
€249.00*
Valve Exhaust flap control CB2 for retrofitted exhaust systems with CB1.2 module
A-005-048
Control via vehicle buttons
Intelligent additional functions
With our valve control for your compatible retrofitted exhaust system, you have the
option to manually switch the exhaust valves.
The control is vehicle-specific via the original vehicle buttons. This gives you full control over your vehicle's sound!
The functionality varies depending on the vehicle; you can find this on the corresponding CB2 product page for your compatible vehicle.
Compatibility
Only compatible with existing CB1.2 (NOT CB1) module for vehicles with retrofitted exhaust systems.
Functionality and Benefits
1)
Intelligent additional functions (vehicle-dependent)
including SSA-Memory & transmission S-detection
2)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide the sound at vehicle start
4)
Plug & Play to CB1.2 module
No use of power thieves
Can be reverted at any time without any traces
€425.00*
Valve Exhaust flap control CB2 PRO for retrofitted exhaust systems with CB1 module (Loop in)
A-005-062
Control via vehicle buttons
Intelligent additional functions
PRO
With our valve control for your compatible aftermarket exhaust system, you have the
option to manually switch the exhaust valves.
The control is vehicle-specific via the original vehicle buttons. This gives you full control over your vehicle's sound!
The functionality varies depending on the vehicle; you can find this on the corresponding CB2 product page for your compatible vehicle.
Compatibility
Only compatible with existing CB1 in vehicles with factory exhaust valves and compatible software.
Functionality and Benefits
1)
Intelligent additional functions (vehicle-dependent)
including SSA-Memory & transmission S-detection
2)
Correct stock mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide the sound at vehicle start
4)
Plug & Play to CB1 module
No use of power thieves
Can be reverted at any time without any traces
€690.00*