Valve Exhaust flap control (CB2) made for Chevrolet Camaro [6. Gen]

Valve Exhaust flap control (CB2) made for Chevrolet Camaro [6. Gen]

Product number: A-005-017

€449.00*

Prices incl. VAT plus shipping costs to Germany

Control via driving profile

Plug & Play install

in the trunk and flaps

The products in your cart are not deliverable to Germany. Please choose a different delivery country in the checkout or write us an email to info@asr-component.de.

The module is suitable for racing vehicles that are built on a Chevrolet Camaro [6. Gen]. Not approved for use on public roads according to the German Road Traffic Regulations (StVO). For racing, show purposes, or export only.

Product information "Valve Exhaust flap control (CB2) made for Chevrolet Camaro [6. Gen]"

With this control unit, you have the option to control your exhaust flaps via the driving modes and the ESP button.

A quiet vehicle start is possible, maximum sound at 40-60 km/h!

Functionality and Benefits

Driving Modes

Track

The exhaust flaps are permanently open, thus increasing the volume. The result is a sporty sound.

Sport

Flaps open from 3000 rpm / 80% throttle (just before kickdown)

Tour / Snow

Flaps open from 4500 rpm / 80% throttle (just before kickdown)

Easy Switch

ESC 2x

Double click on ESC button

With a double click on the ESP button, the flaps can be opened and closed independently of the driving profile. The automatic opening at 4500 rpm is always retained.

Standard Mode

ESC 5sec

Press ESC button for 5 seconds

Hold the ESP button for 5 seconds, and the module will be deactivated. Everything behaves as if no module is installed. As feedback for a successful activation or deactivation, the flaps open and close multiple times.

Function Description in Video

The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=cBtLZRF9UEg

Additional Benefits

Safe and Permanent Operation

This device is specifically designed for use with electric flap systems.

Plug & Play

Installation takes place in the trunk and at the exhaust flaps.

Can be reverted at any time without leaving any traces.

Developed for the racetrack in Germany

Our products are specifically developed for your vehicle to enable more driving pleasure on the racetrack and to comply with track-wide decibel limits.

Installation

The installation takes place in the trunk and at the exhaust flaps.

Notes

No approval in the StVO (German Road Traffic Regulations)
For use in motorsport or for show purposes only
The flaps should not be completely closed during full load driving
Installation at your own risk
No liability is assumed for any damages resulting from disregarding the notes