With this control unit, you have the option to control your exhaust flaps via the Drive Select and the ESP button. Functionality and Benefits Drive Select (Individual: Engine Sound) Dynamic The exhaust flaps are permanently opened, thus increasing the volume. The result is a sporty sound. Auto Flaps open from 3000rpm / 80% throttle (just before kickdown) Comfort Flaps open from 4500rpm / 80% throttle (just before kickdown) Easy Switch ESC 2x Double-click on the ESC button With a double-click on the ESP button, the flaps can be opened and closed independently of the Drive Select. The automatic opening at 4500rpm is always retained. Standard Mode SSA 7sec Hold SSA button for 7 seconds Hold the SSA button for 7 seconds, and the module will be deactivated. Everything behaves as if no module is installed. As feedback for a successful activation or deactivation, the SSA light will automatically switch. Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=oZnlVODGBWw Additional Features and Benefits 1) Transmission S-Detection As soon as you set the transmission to S, both flaps open.(Function only available with original transmission coding) 2) SSA-Memory Setting of the start-stop automatic is saved and restored after vehicle start 3) Misfire-Memory The misfire remains in Dynamic (Individual: Engine/Transmission) even after the engine starts No annoying switching through necessary (exclusive for this model without OPF) 4) Safe and Permanent Operation This device is specifically designed for use with electric flap systems 5) Plug & Play Installation is done Plug & Play in the footwell behind the A-pillar trim Can be reverted at any time without any traces

With our flap control for your Audi RS3 [8V Prefacelift], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track! Functionality and Benefits Sport Mode The exhaust flaps are opened, increasing the volume. The result is a sporty sound. Standard Mode The factory control is restored. Comfort Mode The exhaust flaps are closed, reducing the volume. 1) Control independent of driving profile You decide on the vehicle sound, not the selected driving profile 2) Proper standard mode When the module is deactivated, everything acts as if no module is installed 3) Freely programmable start mode You decide on the sound when starting the vehicle 4) No intervention in the CAN bus No risk to other control units No influence of software updates on the control 5) Plug & Play with original connectors No damage to the original cables, no use of wire taps Can be reverted at any time without any traces 6) Remote control High quality with brushed stainless steel front High range

With our valve control for your Audi RS3 [8V Prefacelift], you have the option to manually switch the exhaust valves. The control is done using the SSA button and alternatively via our classic remote control. This gives you full control over your vehicle's sound on the race track! After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button. Additionally, the module features an SSA memory and restores the start-stop state upon vehicle start. Functionality and Benefits Control via Start-Stop Button SSA 5sec Holding the Start-Stop Button By holding the SSA button, you can switch between controlling the valves and the standard start-stop automatic. SSA 1x Click on Start-Stop Button With a click on the SSA button, the valves or the start-stop automatic are controlled. (depending on the active mode) Control via Remote Control (alternative) Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=vb7beGiLq7E Additional Functions and Benefits 1) SSA Memory Setting of the start-stop automatic is saved and restored after vehicle start 2) Control Independent of Driving Profile You decide on the vehicle sound, not the selected driving profile 3) Proper standard mode When the module is deactivated, everything acts as if no module is installed Can be activated via the SSA button 4) Freely Programmable Start Mode You decide on the sound at vehicle start 5) No Intervention in the CAN Bus No risk to other control units No influence of software updates on the control 6) Plug & Play with Original Connectors No damage to the original cables, no use of current thieves Can be reverted at any time without any traces 7) Remote Control High quality with brushed stainless steel front High range