Control via Drive Select
SSA-Memory (Add-On!)
Transmission S-Detection
With this control unit, you have the option to control your exhaust flaps via the Drive Select and the ESP button.
Functionality and Benefits
Drive Select
Dynamic / RS Performance / RS Torque Rear
The exhaust flaps are permanently opened, thus increasing the volume. The result is a sporty sound.
Auto / Comfort
Flaps open from 3500rpm / 80% throttle (just before kickdown)
Efficiency
Flaps open from 4500rpm / 80% throttle (just before kickdown)
Easy Switch
ESC
2x
Double click on the Reset or ESC button
With a double click on the ESP or Reset button (pull the cruise control lever twice towards you), the flaps can be opened and closed independently of the Drive Select. The automatic opening at 4500rpm is always retained.
Standard Mode
X
+y
Key Combination
A key combination activates or deactivates the module. When the module is deactivated, everything acts as if no module is installed.
Function Description in Video
The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems.
https://www.youtube.com/watch?v=F0SgfnuBOr4
The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems.
https://www.youtube.com/watch?v=Kl4xyM9ku_Y
Additional Features and Benefits
1)
Transmission S-Detection
As soon as you switch the transmission to S, both flaps open.(Function only available with original transmission coding)
2)
SSA-Memory (Additional!)
Setting of the start-stop automatic is saved and restored after vehicle start
3)
Safe and Permanent Operation
This device is specifically designed for use with electric flap systems
4)
Plug & Play
Installation is done Plug & Play in the footwell behind the A-pillar trim
Can be reverted at any time without any traces
With our flap control for your Audi RS3 [8Y Prefacelift], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track!
Functionality and Benefits
Sport Mode
The exhaust flaps are opened, increasing the volume. The result is a sporty sound.
Standard Mode
The factory control is restored.
Comfort Mode
The exhaust flaps are closed, reducing the volume.
1)
Control independent of driving profile
You decide on the vehicle sound, not the selected driving profile
2)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound when starting the vehicle
4)
No intervention in the CAN bus
No risk to other control units
No influence of software updates on the control
5)
Plug & Play with original connectors
No damage to the original cables, no use of wire taps
Can be reverted at any time without any traces
6)
Remote control
High quality with brushed stainless steel front
High range
With our flap control for your Audi RS3 Performance [8Y Prefacelift], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track!
Functionality and Benefits
Sport Mode
The exhaust flaps are opened, increasing the volume. The result is a sporty sound.
Standard Mode
The factory control is restored.
Comfort Mode
The exhaust flaps are closed, reducing the volume.
1)
Control independent of driving profile
You decide on the vehicle sound, not the selected driving profile
2)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound when starting the vehicle
4)
No intervention in the CAN bus
No risk to other control units
No influence of software updates on the control
5)
Plug & Play with original connectors
No damage to the original cables, no use of wire taps
Can be reverted at any time without any traces
6)
Remote control
High quality with brushed stainless steel front
High range
With our valve control for your Audi RS3 [8Y Prefacelift], you have the
option to manually switch the exhaust valves.
The control is done using the SSA button and alternatively via our classic
remote control. This gives you full control over your vehicle's sound on the race track!
After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button.
Additionally, the module features an SSA memory and restores the start-stop state upon
vehicle start.
Functionality and Benefits
Control via Start-Stop Button
SSA
5sec
Holding the Start-Stop Button
By holding the SSA button, you can switch between controlling the valves and the
standard start-stop automatic.
SSA
1x
Click on Start-Stop Button
With a click on the SSA button, the valves or the start-stop automatic are controlled.
(depending on the active mode)
Control via Remote Control (alternative)
Function Description in Video
The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems.
https://www.youtube.com/watch?v=vb7beGiLq7E
Additional Functions and Benefits
1)
SSA Memory
Setting of the start-stop automatic is saved and restored after vehicle start
2)
Control Independent of Driving Profile
You decide on the vehicle sound, not the selected driving profile
3)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
Can be activated via the SSA button
4)
Freely Programmable Start Mode
You decide on the sound at vehicle start
5)
No Intervention in the CAN Bus
No risk to other control units
No influence of software updates on the control
6)
Plug & Play with Original Connectors
No damage to the original cables, no use of current thieves
Can be reverted at any time without any traces
7)
Remote Control
High quality with brushed stainless steel front
High range
Our memory module for your Audi RS3 [8Y Prefacelift] allows you to permanently save the settings of driver assistance systems that are often perceived as distracting. While these assistance systems normally reset every time the vehicle is started, our module ensures that they are set exactly the way you prefer each time you start your car.
Functionality and Benefits
Configurable Functions
Driving Profile Memory
The setting of the driving profile (e.g., Comfort or Sport) is saved and restored after vehicle start.
Start-Stop Automatic Memory
The setting of the start-stop automatic is saved and restored after vehicle start.
Lane Assist Memory (LA)
The setting for the lane-keeping assistant is saved and restored after vehicle start.
Standard Mode
X
+y
Key Combination
The module is activated or deactivated via a key combination. When the module is deactivated, everything acts as if no module is installed.
Additional Benefits
3)
Safe and Permanent Operation
Meticulously developed in Germany for your vehicle
4)
Plug & Play with Easy Installation
NO coding required, just plug in at the gateway and you're done
Can be reverted at any time without any traces
Still have questions? Take a look at our FAQ.