Exhaust Flap Controls for your Audi S3 8V

Memory Modules for your Audi S3 8V

Valve Exhaust flap control (RX1) made for Audi S3 [8V Prefacelift] A-001-003

Audi S3 [8V Prefacelift]

Control via remote control

With our flap control for your Audi S3 [8V Prefacelift], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track! Functionality and Benefits Sport Mode The exhaust flaps are opened, increasing the volume. The result is a sporty sound. Standard Mode The factory control is restored. Comfort Mode The exhaust flaps are closed, reducing the volume. 1) Control independent of driving profile You decide on the vehicle sound, not the selected driving profile 2) Proper standard mode When the module is deactivated, everything acts as if no module is installed 3) Freely programmable start mode You decide on the sound when starting the vehicle 4) No intervention in the CAN bus No risk to other control units No influence of software updates on the control 5) Plug & Play with original connectors No damage to the original cables, no use of wire taps Can be reverted at any time without any traces 6) Remote control High quality with brushed stainless steel front High range

€299.00*

Details

Valve Exhaust flap control (CB2) made for Audi S3 [8V Facelift] A-005-008

Audi S3 [8V Facelift]

Control via Drive Select SSA-Memory

With this control unit, you have the option to control your exhaust flaps via the Drive Select and the ESP button. Functionality and Benefits Driving Modes (Individual: Engine Sound) Dynamic The exhaust flaps are permanently open, thus increasing the volume. The result is a sporty sound. Auto Flaps open from 3000rpm / 80% throttle (just before kickdown) Comfort Flaps open from 4500rpm / 80% throttle (just before kickdown) Easy Switch ESC 2x Double click on ESC button With a double click on the ESP button, the flaps can be opened and closed independently of the driving profile. The automatic opening at 4500rpm is always retained. Standard Mode SSA 7sec Hold SSA button for 7 seconds Hold the SSA button for 7 seconds, and the module will be deactivated. Everything behaves as if no module is installed. As feedback for a successful activation or deactivation, the SSA light will automatically switch. Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=oZnlVODGBWw Additional Features and Benefits 1) SSA-Memory Setting of the start-stop automatic is saved and restored after vehicle start 2) Safe and Permanent Operation This device is specifically designed for use with electric flap systems 3) Plug & Play Installation is done Plug & Play in the footwell behind the A-pillar trim Can be reverted at any time without any traces

€425.00*

Details

Valve Exhaust flap control (RX1) made for Audi S3 [8V Facelift] A-001-003

Audi S3 [8V Facelift]

Control via remote control

With our flap control for your Audi S3 [8V Facelift], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track! Functionality and Benefits Sport Mode The exhaust flaps are opened, increasing the volume. The result is a sporty sound. Standard Mode The factory control is restored. Comfort Mode The exhaust flaps are closed, reducing the volume. 1) Control independent of driving profile You decide on the vehicle sound, not the selected driving profile 2) Proper standard mode When the module is deactivated, everything acts as if no module is installed 3) Freely programmable start mode You decide on the sound when starting the vehicle 4) No intervention in the CAN bus No risk to other control units No influence of software updates on the control 5) Plug & Play with original connectors No damage to the original cables, no use of wire taps Can be reverted at any time without any traces 6) Remote control High quality with brushed stainless steel front High range

€299.00*

Details

Valve Exhaust flap control (CB2) made for Audi S3 [8V Prefacelift] A-005-008

Audi S3 [8V Prefacelift]

Control via Drive Select SSA-Memory

€425.00*

Details

Valve Exhaust flap control (RX2) made for Audi S3 [8V Facelift] A-029-008

Audi S3 [8V Facelift]

Control via SSA button SSA-Memory

With our valve control for your Audi S3 [8V Facelift], you have the option to manually switch the exhaust valves. The control is done using the SSA button and alternatively via our classic remote control. This gives you full control over your vehicle's sound on the race track! After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button. Additionally, the module features an SSA memory and restores the start-stop state upon vehicle start. Functionality and Benefits Control via Start-Stop Button SSA 5sec Holding the Start-Stop Button By holding the SSA button, you can switch between controlling the valves and the standard start-stop automation. SSA 1x Click on Start-Stop Button With a click on the SSA button, the valves or the start-stop automation are controlled. (depending on the active mode) Control via Remote Control (alternative) Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=vb7beGiLq7E Additional Functions and Benefits 1) SSA Memory Setting of the start-stop automation is saved and restored after vehicle start 2) Control Independent of Driving Profile You decide on the vehicle sound, not the selected driving profile 3) Proper standard mode When the module is deactivated, everything acts as if no module is installed Can be activated via the SSA button 4) Freely Programmable Start Mode You decide on the sound at vehicle start 5) No Intervention in the CAN Bus No risk to other control units No influence of software updates on the control 6) Plug & Play with Original Connectors No damage to the original cables, no use of current thieves Can be reverted at any time without any traces 7) Remote Control High quality with brushed stainless steel front High range

€398.00*

Details

Valve Exhaust flap control (RX2) made for Audi S3 [8V Prefacelift] A-029-007

Audi S3 [8V Prefacelift]

Control via SSA button SSA-Memory

With our valve control for your Audi S3 [8V Prefacelift], you have the option to manually switch the exhaust valves. The control is done using the SSA button and alternatively via our classic remote control. This gives you full control over your vehicle's sound on the race track! After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button. Additionally, the module features an SSA memory and restores the start-stop state upon vehicle start. Functionality and Benefits Control via Start-Stop Button SSA 5sec Holding the Start-Stop Button By holding the SSA button, you can switch between controlling the valves and the standard start-stop automatic. SSA 1x Click on Start-Stop Button With a click on the SSA button, the valves or the start-stop automatic are controlled. (depending on the active mode) Control via Remote Control (alternative) Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=vb7beGiLq7E Additional Functions and Benefits 1) SSA Memory Setting of the start-stop automatic is saved and restored after vehicle start 2) Control Independent of Driving Profile You decide on the vehicle sound, not the selected driving profile 3) Proper standard mode When the module is deactivated, everything acts as if no module is installed Can be activated via the SSA button 4) Freely Programmable Start Mode You decide on the sound at vehicle start 5) No Intervention in the CAN Bus No risk to other control units No influence of software updates on the control 6) Plug & Play with Original Connectors No damage to the original cables, no use of current thieves Can be reverted at any time without any traces 7) Remote Control High quality with brushed stainless steel front High range

€398.00*

Details

Choose your Audi S3 8V

Choose the base model for your race car. If you are unsure about your choice or compatibility, we are happy to assist you.

About our valve controllers

Our valve controllers, developed in Germany, allow manual control of the exhaust valves using a remote control or the original buttons – for maximum control over the sound with "plug and play" installation.

Emotion at the push of a button

Open your exhaust valves at the push of a button to unleash maximum emotion on the racetrack.

Quiet when you want it

To make your drive more relaxed—or to comply with decibel limits on the racetrack—you can close the valves independently of the driving mode.

Smart additional features

The CB2 controllers offer, among other things, a memory function for the start-stop system.

About our Memory Modules

Our memory modules make it possible to permanently enable or disable functions such as speed warning, lane assist, or start-stop system.

Permanently disable assistance systems

Our memory modules allow you to permanently deactivate systems such as speed warning or lane assist in your race car if desired.

Simplified startup

No more tedious deactivation of functions when starting the vehicle!

Plug & Play

Simple installation with the included instructions; can be reverted without leaving any traces. No coding required!

Find the right valve controller for your Audi S3 8V

A comparison of the features of our valve controller series for your Audi S3 8V.

About your Audi S3 8V

Audi S3 8V

The Audi S3 8V is a high-performance variant of the Audi A3, first introduced in 2013.
The 8V generation of the S3 is based on Volkswagen's MQB platform, which allows for improved driving dynamics and efficiency.
The S3 8V features a 2.0-liter TSI engine that delivers up to 310 horsepower.
The vehicle is equipped with a Quattro all-wheel-drive system, ensuring optimal traction and stability.
It accelerates from 0 to 100 km/h in just 4.6 seconds, making it one of the fastest compact sports cars.
The design of the S3 8V includes sporty elements such as aggressive bumpers, a distinctive grille, and special S3 badges.
Inside, the S3 8V combines sportiness and luxury, featuring high-quality materials and modern technologies.
Available technologies include a digital cockpit, an infotainment system, and advanced driver assistance systems.
The S3 models are available in various body styles, including sedan and Sportback.
The Audi S3 8V has established itself as a popular model among car enthusiasts, praised for its performance and versatility.