- Car models
- Exhaust Flaps
- Accessories
- Usage
- Partners
Control via
Valve Exhaust flap control (CB2) made for Porsche 911 Carrera (4) GTS [992.2]
A-005-057
Porsche 911 Carrera (4) GTS [992.2]
Control via exhaust button
SSA-Memory
PRO
With this control unit, you have the option to control your exhaust flaps via the exhaust button and the cruise control lever.
Functionality and Benefits
Exhaust Button
Active
The exhaust flaps are permanently opened, thus increasing the volume. The result is a sporty sound.
Inactive
Flaps open at 4000rpm / 80% throttle
Easy Switch
Speed
2x
Cruise Control Lever
By pulling the cruise control lever twice towards you, the flaps can be opened independently of the exhaust button. This setting is saved.
Standard Mode
X
+y
Key Combination
A key combination activates or deactivates the module. When the module is deactivated, everything acts as if no module is installed.
Function Description in Video
The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems.
https://www.youtube.com/watch?v=up7BbOm6pGA
Additional Features and Benefits
2)
SSA-Memory
Setting of the start-stop automatic is saved and restored after vehicle start
3)
Safe and Permanent Operation
This device is specifically designed for use with electric flap systems
Available in PRO version
4)
Driving Profile Memory
The setting of the driving profile (e.g., Comfort or Sport) is permanently saved.
5)
Speed Assist Memory (ISA)
Allows for the permanent activation or deactivation of the acoustic speed warning. A custom configuration is also saved!
6)
Lane Assist Memory (LA)
Allows for the permanent activation or deactivation of the lane keeping assistant.
7)
Exhaust Button Memory
The setting of the exhaust button is permanently saved.
€650.00*
Valve Exhaust flap control (RX1) made for Porsche 911 Carrera (4) GTS [992.2]
A-001-062
Porsche 911 Carrera (4) GTS [992.2]
Control via remote transmitter
With our flap control for your Porsche 911 Carrera (4) GTS [992.2], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track!
Functionality and Benefits
Sport Mode
The exhaust flaps are opened, increasing the volume. The result is a sporty sound.
Standard Mode
The factory control is restored.
Comfort Mode
The exhaust flaps are closed, reducing the volume.
1)
Control independent of driving profile
You decide on the vehicle sound, not the selected driving profile
2)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound when starting the vehicle
4)
No intervention in the CAN bus
No risk to other control units
No influence of software updates on the control
5)
Plug & Play with original connectors
No damage to the original cables, no use of wire taps
Can be reverted at any time without any traces
6)
Remote control
High quality with brushed stainless steel front
High range
€549.00*
Memory Module PRO made for Porsche 911 [992.2]
Porsche 911 [992.2]
PRO
Our memory module for your Porsche 911 [992.2] allows you to permanently save the settings of driver assistance systems that are often perceived as distracting. While these assistance systems normally reset every time the vehicle is started, our module ensures that they are set exactly the way you prefer each time you start your car.
Functionality and Benefits
Configurable Functions
Driving Profile & Exhaust Button Memory
The setting of the driving profile (e.g., Normal or Sport) and the state of the Exhaust Button is saved and restored after vehicle start.
Speed Assist Memory (ISA)
The setting for the acoustic speed warning is saved and restored after vehicle start. Individual configurations are also saved!
SSA Memory
The setting of the start-stop automatic is saved and restored after vehicle start.
Lane Assist Memory (LA)
The setting for the lane-keeping assistant is saved and restored after vehicle start.
Auto-Blip Memory
The setting for the automatic rev‑matching (blipping) function is saved and restored after vehicle start.
Standard Mode
X
+y
Key Combination
The module is activated or deactivated via a key combination. When the module is deactivated, everything acts as if no module is installed.
Additional Benefits
3)
Safe and Permanent Operation
Meticulously developed in Germany for your vehicle
4)
Plug & Play
NO coding required, just plug in and you're done
Can be reverted at any time without any traces
Still have questions? Take a look at our FAQ.
From €199.00*