- Car models
- Exhaust Flaps
- Accessories
- Usage
- Partners
Control via
Valve Exhaust flap control (RX1) made for VW Passat 2.0 TFSI [B8]
A-001-020.2
VW Passat 2.0 TFSI [B8]
Control via remote control
With our flap control for your VW Passat 2.0 TFSI [B8], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track!
Functionality and Benefits
Sport Mode
The exhaust flaps are opened, increasing the volume. The result is a sporty sound.
Standard Mode
The factory control is restored.
Comfort Mode
The exhaust flaps are closed, reducing the volume.
1)
Control independent of driving profile
You decide on the vehicle sound, not the selected driving profile
2)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound when starting the vehicle
4)
No intervention in the CAN bus
No risk to other control units
No influence of software updates on the control
5)
Plug & Play with original connectors
No damage to the original cables, no use of wire taps
Can be reverted at any time without any traces
6)
Remote control
High quality with brushed stainless steel front
High range
€299.00*
Valve Exhaust flap control (RX2) made for VW Passat 2.0 TFSI [B8]
A-029-022
VW Passat 2.0 TFSI [B8]
Control via SSA button
SSA-Memory
With our valve control for your VW Passat 2.0 TFSI [B8], you have the
option to manually switch the exhaust valves.
The control is done using the SSA button and alternatively via our classic
remote control. This gives you full control over your vehicle's sound on the race track!
After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button.
Additionally, the module features an SSA memory and restores the start-stop state upon
vehicle start.
Functionality and Benefits
Control via Start-Stop Button
SSA
5sec
Holding the Start-Stop Button
By holding the SSA button, you can switch between controlling the valves and the
standard start-stop automatic.
SSA
1x
Click on Start-Stop Button
With a click on the SSA button, the valves or the start-stop automatic are controlled.
(depending on the active mode)
Control via Remote Control (alternative)
Function Description in Video
The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems.
https://www.youtube.com/watch?v=vb7beGiLq7E
Additional Functions and Benefits
1)
SSA Memory
Setting of the start-stop automatic is saved and restored after vehicle start
2)
Control Independent of Driving Profile
You decide on the vehicle sound, not the selected driving profile
3)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
Can be activated via the SSA button
4)
Freely Programmable Start Mode
You decide on the sound at vehicle start
5)
No Intervention in the CAN Bus
No risk to other control units
No influence of software updates on the control
6)
Plug & Play with Original Connectors
No damage to the original cables, no use of current thieves
Can be reverted at any time without any traces
7)
Remote Control
High quality with brushed stainless steel front
High range
€398.00*