Valve Exhaust flap control (RX2) made for Audi TTS [8S]

Product number: A-029-015

€398.00*

Prices incl. VAT plus shipping costs to Germany

Control via SSA button

SSA-Memory

Plug & Play install

in the footwell and in the center console

The products in your cart are not deliverable to Germany. Please choose a different delivery country in the checkout or write us an email to info@asr-component.de.

The module is suitable for racing vehicles that are built on a Audi TTS [8S]. Not approved for use on public roads according to the German Road Traffic Regulations (StVO). For racing, show purposes, or export only.

Product information "Valve Exhaust flap control (RX2) made for Audi TTS [8S]"

With our valve control for your Audi TTS [8S], you have the option to manually switch the exhaust valves.
The control is done using the SSA button and alternatively via our classic remote control. This gives you full control over your vehicle's sound on the race track!

After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button. Additionally, the module features an SSA memory that restores the start-stop state upon vehicle start.

Functionality and Benefits

Control via Start-Stop Button

SSA 5sec

Holding the Start-Stop Button

By holding the SSA button, you can switch between controlling the valves and the standard start-stop automatic.

SSA 1x

Click on Start-Stop Button

With a click on the SSA button, the valves or the start-stop automatic are controlled. (depending on the active mode)

Control via Remote Control (alternative)

Function Description in Video

The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=vb7beGiLq7E

Additional Functions and Benefits

SSA Memory

Setting of the start-stop automatic is saved and restored after vehicle start

Control Independent of Driving Profile

You decide on the vehicle sound, not the selected driving profile

Proper standard mode

When the module is deactivated, everything acts as if no module is installed

Can be activated via the SSA button

Freely Programmable Start Mode

You decide on the sound at vehicle start

No Intervention in the CAN Bus

No risk to other control units

No influence of software updates on the control

Plug & Play with Original Connectors

No damage to the original cables, no use of current thieves

Can be reverted at any time without any traces

Remote Control

High quality with brushed stainless steel front

High range

Developed for the racetrack in Germany

Our products are specifically developed for your vehicle to enable more driving pleasure on the racetrack and to comply with track-wide decibel limits.

Installation

The installation is done plug and play in the footwell behind the A-pillar trim (instructions are included in the delivery).

Start Mode

The start mode describes in which mode the device should start after turning on the ignition. In the standard configuration, the device saves the last set mode and restores it when the vehicle is started. If you want a specific mode to be active at startup, regardless of how you parked your vehicle, this can be programmed.

The start mode can be freely programmed as desired

Last State: Press the button for the “Sport Mode” 5 times within 5 seconds.
Other Modes: Press the button for the mode you want to set as the start mode for about 10 seconds.

The flaps open and close 5 times to confirm the successful programming of the start mode.

Notes

No approval in the StVO (German Road Traffic Regulations)
For use in motorsport or for show purposes only
The flaps should not be completely closed during full load driving
Installation at your own risk
No liability is assumed for any damages resulting from disregarding the notes