Exhaust Flap Controls for your Audi TTS 8S

Memory Modules for your Audi TTS 8S

Valve Exhaust flap control (RX1) made for Audi TTS [8S] A-001-003.1

Audi TTS [8S]

Control via remote control

With our flap control for your Audi TTS [8S], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track! Functionality and Benefits Sport Mode The exhaust flaps are opened, increasing the volume. The result is a sporty sound. Standard Mode The factory control is restored. Comfort Mode The exhaust flaps are closed, reducing the volume. 1) Control independent of driving profile You decide on the vehicle sound, not the selected driving profile 2) Proper standard mode When the module is deactivated, everything acts as if no module is installed 3) Freely programmable start mode You decide on the sound when starting the vehicle 4) No intervention in the CAN bus No risk to other control units No influence of software updates on the control 5) Plug & Play with original connectors No damage to the original cables, no use of wire taps Can be reverted at any time without any traces 6) Remote control High quality with brushed stainless steel front High range

€299.00*

Details

Valve Exhaust flap control (RX2) made for Audi TTS [8S] A-029-015

Audi TTS [8S]

Control via SSA button SSA-Memory

With our valve control for your Audi TTS [8S], you have the option to manually switch the exhaust valves. The control is done using the SSA button and alternatively via our classic remote control. This gives you full control over your vehicle's sound on the race track! After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button. Additionally, the module features an SSA memory that restores the start-stop state upon vehicle start. Functionality and Benefits Control via Start-Stop Button SSA 5sec Holding the Start-Stop Button By holding the SSA button, you can switch between controlling the valves and the standard start-stop automatic. SSA 1x Click on Start-Stop Button With a click on the SSA button, the valves or the start-stop automatic are controlled. (depending on the active mode) Control via Remote Control (alternative) Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=vb7beGiLq7E Additional Functions and Benefits 1) SSA Memory Setting of the start-stop automatic is saved and restored after vehicle start 2) Control Independent of Driving Profile You decide on the vehicle sound, not the selected driving profile 3) Proper standard mode When the module is deactivated, everything acts as if no module is installed Can be activated via the SSA button 4) Freely Programmable Start Mode You decide on the sound at vehicle start 5) No Intervention in the CAN Bus No risk to other control units No influence of software updates on the control 6) Plug & Play with Original Connectors No damage to the original cables, no use of current thieves Can be reverted at any time without any traces 7) Remote Control High quality with brushed stainless steel front High range

€398.00*

Details

Valve Exhaust flap control (CB2) made for Audi TTS [8S] A-005-029

Audi TTS [8S]

Control via driving profile SSA-Memory

With this control unit, you have the option to control your exhaust flaps via the Drive Select and the ESP button. Functionality and Benefits Driving Modes (Individual: Engine Sound) Dynamic The exhaust flaps are permanently open, thus increasing the volume. The result is a sporty sound. Auto Flaps open from 3000rpm / 80% throttle (just before kickdown) Comfort Flaps open from 4500rpm / 80% throttle (just before kickdown) Easy Switch ESC 2x Double click on ESC button With a double click on the ESP button, the flaps can be opened and closed independently of the driving profile. The automatic opening at 4500rpm is always retained. Standard Mode SSA 7sec Hold SSA button for 7 seconds Hold the SSA button for 7 seconds, and the module will be deactivated. Everything behaves as if no module is installed. As feedback for a successful activation or deactivation, the SSA light will automatically switch. Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=oZnlVODGBWw Additional Features and Benefits 1) SSA-Memory Setting of the start-stop automatic is saved and restored after vehicle start 2) Safe and Permanent Operation This device is specifically designed for use with electric flap systems 3) Plug & Play Installation is plug & play in the footwell behind the A-pillar trim Can be reverted at any time without any traces

€425.00*

Details

Choose your Audi TTS 8S

Choose the base model for your race car. If you are unsure about your choice or compatibility, we are happy to assist you.

About our valve controllers

Our valve controllers, developed in Germany, allow manual control of the exhaust valves using a remote control or the original buttons – for maximum control over the sound with "plug and play" installation.

Emotion at the push of a button

Open your exhaust valves at the push of a button to unleash maximum emotion on the racetrack.

Quiet when you want it

To make your drive more relaxed—or to comply with decibel limits on the racetrack—you can close the valves independently of the driving mode.

Smart additional features

The CB2 controllers offer, among other things, a memory function for the start-stop system.

About our Memory Modules

Our memory modules make it possible to permanently enable or disable functions such as speed warning, lane assist, or start-stop system.

Permanently disable assistance systems

Our memory modules allow you to permanently deactivate systems such as speed warning or lane assist in your race car if desired.

Simplified startup

No more tedious deactivation of functions when starting the vehicle!

Plug & Play

Simple installation with the included instructions; can be reverted without leaving any traces. No coding required!

Find the right valve controller for your Audi TTS 8S

A comparison of the features of our valve controller series for your Audi TTS 8S.

About your Audi TTS 8S

Audi TTS 8S

The Audi TTS 8S is a sporty coupe manufactured by the German automobile brand Audi.
It belongs to the second generation of the Audi TT and was first introduced in 2014.
The TTS 8S is characterized by its powerful engine and sporty driving dynamics.
Under the hood, it typically features a 2.0-liter TFSI engine that delivers around 310 horsepower.
The vehicle is equipped with a Quattro all-wheel-drive system, providing excellent traction.
The design of the TTS 8S combines elegant lines with aggressive accents that highlight its sporty character.
Inside, high-quality materials and state-of-the-art technologies enhance driving comfort.
The Audi TTS 8S also offers a variety of driver assistance systems that improve safety and usability.
The vehicle is suitable for both everyday use and sporty driving, enjoying great popularity among car enthusiasts.
Production of the TTS 8S ended in 2022, but the model remains a beloved classic among sports cars.