- Car models
- Exhaust Flaps
- Accessories
- Usage
- Partners
Control via
Valve Exhaust flap control (RX1) made for Audi SQ5 [FY]
A-001-001
Audi SQ5 [FY]
Control via remote control
With our flap control for your Audi SQ5 [FY], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track!
Functionality and Benefits
Sport Mode
The exhaust flaps are opened, increasing the volume. The result is a sporty sound.
Standard Mode
The factory control is restored.
Comfort Mode
The exhaust flaps are closed, reducing the volume.
1)
Control independent of driving profile
You decide on the vehicle sound, not the selected driving profile
2)
Proper standard mode
When the module is deactivated, everything acts as if no module is installed
3)
Freely programmable start mode
You decide on the sound when starting the vehicle
4)
No intervention in the CAN bus
No risk to other control units
No influence of software updates on the control
5)
Plug & Play with original connectors
No damage to the original cables, no use of wire taps
Can be reverted at any time without any traces
6)
Remote control
High quality with brushed stainless steel front
High range
€279.00*
Valve Exhaust flap control (CB2) made for Audi SQ5 [FY]
A-005-040
Audi SQ5 [FY]
Control via Drive Select
SSA-Memory
With this control unit, you have the option to control your exhaust flaps via the Drive Select and the ESP button.
Functionality and Benefits
Drive Select (Individual: Engine Sound)
Dynamic
The exhaust flaps are permanently open, thus increasing the volume. The result is a sporty sound.
Auto
Flaps open from 3000rpm / 80% throttle (just before kickdown)
Comfort
Flaps open from 4500rpm / 80% throttle (just before kickdown)
Easy Switch
ESC
2x
Double click on the ESC button
With a double click on the ESP button, the flaps can be opened and closed independently of the Drive Select. The automatic opening at 4500rpm is always retained.
Standard Mode
SSA
7sec
Hold the SSA button for 7 seconds
Hold the SSA button for 7 seconds, and the module will be deactivated. Everything behaves as if no module is installed. As feedback for a successful activation or deactivation, the SSA light will automatically switch.
Function Description in Video
Note: Not all functions are available on the SQ5.
The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems.
https://www.youtube.com/watch?v=oZnlVODGBWw
Additional Functions and Benefits
1)
SSA-Memory
Setting of the start-stop automatic is saved and restored after vehicle start
2)
Safe and Permanent Operation
This device is specifically designed for use with electric flap systems
3)
Plug & Play
Installation is done Plug & Play
Can be reverted at any time without any traces
€425.00*