Exhaust Flap Controls for your S3 8Y Facelift

Memory Modules for your S3 8Y Facelift

Valve Exhaust flap control (RX1) made for Audi S3 [8Y Facelift] A-001-021

Audi S3 [8Y Facelift]

Control via remote control

With our flap control for your Audi S3 [8Y Facelift], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track! Functionality and Benefits Sport Mode The exhaust flaps are opened, increasing the volume. The result is a sporty sound. Standard Mode The factory control is restored. Comfort Mode The exhaust flaps are closed, reducing the volume. 1) Control independent of driving profile You decide on the vehicle sound, not the selected driving profile 2) Proper standard mode When the module is deactivated, everything acts as if no module is installed 3) Freely programmable start mode You decide on the sound when starting the vehicle 4) No intervention in the CAN bus No risk to other control units No influence of software updates on the control 5) Plug & Play with original connectors No damage to the original cables, no use of wire taps Can be reverted at any time without any traces 6) Remote control High quality with brushed stainless steel front High range

€299.00*

Details

Valve Exhaust flap control (CB2) made for Audi S3 [8Y Facelift] A-005-067

Audi S3 [8Y Facelift]

Control via Drive Select (Driving Profile) SSA-Memory Transmission S-Detection PRO

With this control unit, you have the option to control your exhaust flaps via the Drive Select (driving profile) and the cruise control lever . Functionality and Benefits Drive Select Dynamic The exhaust flaps are permanently opened, thus increasing the volume. The result is a sporty sound. Auto Flaps switch as in the series Comfort / Efficiency Flaps open from 4500rpm / 80% throttle (just before kickdown) Easy Switch RESET 2x Double click on the reset button With a double click on the reset button (pulling the cruise control lever towards you twice), the flaps can be opened and closed independently of the Drive Select. The automatic opening at 4500rpm is always retained. Standard Mode X +y Key combination A key combination activates or deactivates the module. When the module is deactivated, everything acts as if no module is installed. Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=kvaX8pR70zo Additional Features and Benefits 1) Transmission S-Detection As soon as you set the transmission to S, both flaps open.(Function only available with original transmission coding) 2) SSA-Memory Setting of the start-stop automatic is saved and restored after vehicle start 3) Safe and Permanent Operation This device is specifically designed for use with electric flap systems 4) Plug & Play Installation is done Plug & Play in the footwell behind the A-pillar trim Can be reverted at any time without any traces Available in PRO version 5) Driving Profile Memory (Drive Select) The setting of the driving profile (e.g., Comfort or Sport) is permanently saved. 6) Speed Assist Memory (ISA) Allows for the permanent activation or deactivation of the acoustic speed warning. A custom configuration is also saved! 7) Lane Assist Memory (LA) Allows for the permanent activation or deactivation of the eco lane keeping assistant.

€425.00*

Details

Memory Module PRO made for Audi S3 [8Y Facelift]

Audi S3 [8Y Facelift]

PRO

Our memory module for your Audi S3 [8Y Facelift] allows you to permanently save the settings of driver assistance systems that are often perceived as distracting. While these assistance systems normally reset every time the vehicle is started, our module ensures that they are set exactly the way you prefer each time you start your car. Functionality and Benefits Configurable Functions Drive Profile Memory (Drive Select) The setting of the driving profile (e.g., Comfort or Sport) is saved and restored after vehicle start. Speed Assist Memory (ISA) The setting for the acoustic speed warning is saved and restored after vehicle start. Individual configurations are also saved! SSA Memory The setting of the start-stop automatic is saved and restored after vehicle start. Lane Assist Memory (LA) The setting for the lane-keeping assistant is saved and restored after vehicle start. Standard Mode X +y Key Combination The module is activated or deactivated via a key combination. When the module is deactivated, everything acts as if no module is installed. Additional Benefits 3) Safe and Permanent Operation Meticulously developed in Germany for your vehicle 4) Plug & Play with Easy Installation NO coding required, just plug in between the gateway and you're done Can be reverted at any time without any traces Still have questions? Take a look at our FAQ.

From €199.00*

Details

Valve Exhaust flap control (RX2) made for Audi S3 [8Y Facelift] A-029-010

Audi S3 [8Y Facelift]

Control via SSA button SSA-Memory

With our valve control for your Audi S3 [8Y Facelift], you have the option to manually switch the exhaust valves. The control is done using the SSA button and alternatively via our classic remote control. This gives you full control over your vehicle's sound on the race track! After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button. Additionally, the module features an SSA memory and restores the start-stop state upon vehicle start. Functionality and Benefits Control via Start-Stop Button SSA 5sec Holding the Start-Stop Button By holding the SSA button, you can switch between controlling the valves and the standard start-stop automatic. SSA 1x Click on Start-Stop Button With a click on the SSA button, the valves or the start-stop automatic are controlled. (depending on the active mode) Control via Remote Control (alternative) Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=vb7beGiLq7E Additional Functions and Benefits 1) SSA Memory Setting of the start-stop automatic is saved and restored after vehicle start 2) Control Independent of Driving Profile You decide on the vehicle sound, not the selected driving profile 3) Proper standard mode When the module is deactivated, everything acts as if no module is installed Can be activated via the SSA button 4) Freely Programmable Start Mode You decide on the sound at vehicle start 5) No Intervention in the CAN Bus No risk to other control units No influence of software updates on the control 6) Plug & Play with Original Connectors No damage to the original cables, no use of current thieves Can be reverted at any time without any traces 7) Remote Control High quality with brushed stainless steel front High range

€398.00*

Details

Choose your S3 8Y Facelift

Choose the base model for your race car. If you are unsure about your choice or compatibility, we are happy to assist you.

About our valve controllers

Our valve controllers, developed in Germany, allow manual control of the exhaust valves using a remote control or the original buttons – for maximum control over the sound with "plug and play" installation.

Emotion at the push of a button

Open your exhaust valves at the push of a button to unleash maximum emotion on the racetrack.

Quiet when you want it

To make your drive more relaxed—or to comply with decibel limits on the racetrack—you can close the valves independently of the driving mode.

Smart additional features

The CB2 controllers offer, among other things, a memory function for the start-stop system.

About our Memory Modules

Our memory modules make it possible to permanently enable or disable functions such as speed warning, lane assist, or start-stop system.

Permanently disable assistance systems

Our memory modules allow you to permanently deactivate systems such as speed warning or lane assist in your race car if desired.

Simplified startup

No more tedious deactivation of functions when starting the vehicle!

Plug & Play

Simple installation with the included instructions; can be reverted without leaving any traces. No coding required!

Find the right valve controller for your S3 8Y Facelift

A comparison of the features of our valve controller series for your S3 8Y Facelift.

About your S3 8Y Facelift

Audi S3 8Y Facelift

The Audi S3 8Y Facelift version is a sporty compact sedan based on the successful Audi A3 platform.
The facelift variant was introduced in 2021 and features a range of design and technology modifications.
Visually, the vehicle is characterized by an aggressive front end with narrower headlights and a prominent grille.
Under the hood, the S3 is powered by a robust 2.0-liter TSI engine that delivers up to 310 horsepower.
The vehicle is equipped with Quattro all-wheel drive, ensuring excellent traction and driving dynamics.
Inside, high-quality materials and state-of-the-art infotainment technology, including a digital cockpit, can be found.
Safety and assistance systems have also been enhanced to improve driving comfort and safety.
The S3 8Y Facelift offers a variety of customization options to cater to buyers' personal tastes.
The suspension tuning provides a sporty driving experience while not neglecting everyday usability.
Overall, the Audi S3 8Y Facelift represents a successful combination of performance, comfort, and modern design.