Exhaust Flap Controls for your S3 8Y Prefacelift

Memory Modules for your S3 8Y Prefacelift

Valve Exhaust flap control (RX1) made for Audi S3 [8Y Prefacelift] A-001-021

Audi S3 [8Y Prefacelift]

Control via remote control

With our flap control for your Audi S3 [8Y Prefacelift], you have the ability to manually control the exhaust flaps. The control is done using a remote control. This gives you full control over your vehicle's sound on the race track! Functionality and Benefits Sport Mode The exhaust flaps are opened, increasing the volume. The result is a sporty sound. Standard Mode The factory control is restored. Comfort Mode The exhaust flaps are closed, reducing the volume. 1) Control independent of driving profile You decide on the vehicle sound, not the selected driving profile 2) Proper standard mode When the module is deactivated, everything acts as if no module is installed 3) Freely programmable start mode You decide on the sound when starting the vehicle 4) No intervention in the CAN bus No risk to other control units No influence of software updates on the control 5) Plug & Play with original connectors No damage to the original cables, no use of wire taps Can be reverted at any time without any traces 6) Remote control High quality with brushed stainless steel front High range

€299.00*

Details

Valve Exhaust flap control (CB2) made for Audi S3 [8Y Prefacelift] A-CB2-S3-8Y

Audi S3 [8Y]

Control via Drive Select SSA-Memory (Add-On!) Transmission S-Detection

With this control unit, you have the option to control your exhaust flaps via the Drive Select and the ESP button. Functionality and Benefits Drive Select Dynamic The exhaust flaps are permanently open, thus increasing the volume. The result is a sporty sound. Auto / Comfort Flaps open from 3500rpm / 80% throttle (just before kickdown) Efficiency Flaps open from 4500rpm / 80% throttle (just before kickdown) Easy Switch ESC 2x Double click on the Reset or ESC button With a double click on the ESP or Reset button (pull the cruise control lever twice towards you), the flaps can be opened and closed independently of the Drive Select. The automatic opening at 4500rpm is always retained. Standard Mode X +y Key Combination A key combination activates or deactivates the module. When the module is deactivated, everything acts as if no module is installed. Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=IxoODKAly4c Additional Features and Benefits 1) Transmission S-Detection As soon as you set the transmission to S, both flaps open.(Function only available with original transmission coding) 2) SSA-Memory (Additional!) Setting of the start-stop automatic is saved and restored after vehicle start 3) Safe and Permanent Operation This device is specifically designed for use with electric flap systems 4) Plug & Play Installation is done Plug & Play in the footwell behind the A-pillar trim Can be reverted at any time without any traces

From €395.00*

Details

Valve Exhaust flap control (RX2) made for Audi S3 [8Y Prefacelift] A-029-010

Audi S3 [8Y Prefacelift]

Control via SSA button SSA-Memory

With our valve control for your Audi S3 [8Y Prefacelift], you have the option to manually switch the exhaust valves. The control is done using the SSA button and alternatively via our classic remote control. This gives you full control over your vehicle's sound on the race track! After installation, you can control the exhaust valves as well as the start-stop function via the start-stop button. Additionally, the module features an SSA memory and restores the start-stop state upon vehicle start. Functionality and Benefits Control via Start-Stop Button SSA 5sec Holding the Start-Stop Button By holding the SSA button, you can switch between controlling the valves and the standard start-stop automatic. SSA 1x Click on Start-Stop Button With a click on the SSA button, the valves or the start-stop automatic are controlled. (depending on the active mode) Control via Remote Control (alternative) Function Description in Video The linked video is not under the responsibility of ASR Component GmbH, but of the owner of the respective channel. It illustrates usage in countries where there are no restrictions on vehicle noise levels or other related systems. https://www.youtube.com/watch?v=vb7beGiLq7E Additional Functions and Benefits 1) SSA Memory Setting of the start-stop automatic is saved and restored after vehicle start 2) Control Independent of Driving Profile You decide on the vehicle sound, not the selected driving profile 3) Proper standard mode When the module is deactivated, everything acts as if no module is installed Can be activated via the SSA button 4) Freely Programmable Start Mode You decide on the sound at vehicle start 5) No Intervention in the CAN Bus No risk to other control units No influence of software updates on the control 6) Plug & Play with Original Connectors No damage to the original cables, no use of current thieves Can be reverted at any time without any traces 7) Remote Control High quality with brushed stainless steel front High range

€398.00*

Details

Memory Module PRO made for Audi S3 [8Y Prefacelift]

Audi S3 [8Y Prefacelift]

PRO

Our memory module for your Audi S3 [8Y Prefacelift] allows you to permanently save the settings of driver assistance systems that are often perceived as distracting. While these assistance systems normally reset every time the vehicle is started, our module ensures that they are set exactly the way you prefer each time you start your car. Functionality and Benefits Configurable Functions Driving Profile Memory The setting of the driving profile (e.g., Comfort or Sport) is saved and restored after vehicle start. Start-Stop Automatic Memory The setting of the start-stop automatic is saved and restored after vehicle start. Lane Assist Memory (LA) The setting for the lane-keeping assistant is saved and restored after vehicle start. Standard Mode X +y Key Combination The module is activated or deactivated via a key combination. When the module is deactivated, everything acts as if no module is installed. Additional Benefits 3) Safe and Permanent Operation Meticulously developed in Germany for your vehicle 4) Plug & Play with Easy Installation NO coding required, just plug in at the gateway and you're done Can be reverted at any time without any traces Still have questions? Take a look at our FAQ.

From €199.00*

Details

Choose your S3 8Y Prefacelift

Choose the base model for your race car. If you are unsure about your choice or compatibility, we are happy to assist you.

About our valve controllers

Our valve controllers, developed in Germany, allow manual control of the exhaust valves using a remote control or the original buttons – for maximum control over the sound with "plug and play" installation.

Emotion at the push of a button

Open your exhaust valves at the push of a button to unleash maximum emotion on the racetrack.

Quiet when you want it

To make your drive more relaxed—or to comply with decibel limits on the racetrack—you can close the valves independently of the driving mode.

Smart additional features

The CB2 controllers offer, among other things, a memory function for the start-stop system.

About our Memory Modules

Our memory modules make it possible to permanently enable or disable functions such as speed warning, lane assist, or start-stop system.

Permanently disable assistance systems

Our memory modules allow you to permanently deactivate systems such as speed warning or lane assist in your race car if desired.

Simplified startup

No more tedious deactivation of functions when starting the vehicle!

Plug & Play

Simple installation with the included instructions; can be reverted without leaving any traces. No coding required!

Find the right valve controller for your S3 8Y Prefacelift

A comparison of the features of our valve controller series for your S3 8Y Prefacelift.

About your S3 8Y Prefacelift

Audi S3 8Y Prefacelift

The Audi S3 8Y Prefacelift is a sporty compact sedan produced by the renowned German automaker Audi.
This model belongs to the third generation of the Audi S3 series and is based on the MQB platform of the Volkswagen Group.
The pre-facelift version was first introduced in 2020, offering a blend of performance and everyday usability.
Powering the S3 8Y is a 2.0-liter TSI engine that delivers up to 310 horsepower.
The acceleration from 0 to 100 km/h occurs in just 4.8 seconds, making it one of the fastest in its class.
The Quattro all-wheel-drive system ensures excellent traction and stability on various road conditions.
Inside, the S3 8Y features high-quality materials with modern infotainment systems and sporty accents.
Safety features include advanced driver assistance systems that make driving safer and more comfortable.
The design of the pre-facelift version is characterized by sharp lines and aggressive front headlights, staying true to the Audi brand.
Overall, the Audi S3 8Y Prefacelift is a successful combination of sportiness and functionality, suitable for both daily driving and sporty outings.